Polishing and bridge install

     Final polishing and bridge install are done. After 10-days from the final finish apply, I can polish the body, neck, and bridge. I have been using the 3M, 401 wet sandpaper #2000-grit. I only have one wet sanding session. Then, I have one hand polishing session using the Meguire mirror glaze #7. 

     After polishing the body, I installed the bridge. I have been using the vacuum bridge clump. The installed Blbridge needs a drilling and tapering the bridge pin holes for fitting the bridge pins. 

     Next step is the nut and the saddle making, fret wire leveling and dressing. I will put strings and test this guitar next weekend.