I completed the classical guitar making project. I installed strings in 11/23/2019 first time. Strings action over the 12-fret wire is 3.4mm for the low-E and 3mm for the high-E. This is quite low action setting. I installed the D'Addario EJ45 normal tension strings. This guitar has been improving the sound quality day-by-day. Now, I have good confidence that this guitar has very nice bright sound character. Low-E string has very power full sound. I feel strong vibration in my stomach, when I hit the low-E string. This result is due to the graphite rod reinforcement in the last photo. Those carbon rods braces hold the neck very tight. Also, those braces are able to avoid future deformation issue for the neck angle change. Carbon braces are super light weight; therefore, the additional weight penalty is very minimum. I am very happy with this results.
Please enjoy posted photos for the completed Classical guitar. The guitar specifications are shown in below.
Strings Scale: 650 mm with African Black wood fingerboard
Neck profile: 52 mm at nut and 62 mm at 12 Fret
Neck: Cedro-Black Dyed Maple-Maple-Ebony-Maple-Black-dyed Maple-Cedro (7-play) with a Graphite rod reinforcement
Top: European Spruce with Balsa and Graphite with Epoxy composite
Back: Curly Maple from West coast USA
Sides: Curly maple and Yellow Cedar laminate
Bridge: Brazilian Rosewood
Binding: Ebony
Tuning machines: Gilbert
Head plate veneer: Ebony (top and back)
Armrest: Black dyed maple
Nut and saddle: Bone
Finishing: Shellac (top) and Water based acrylic
No comments:
Post a Comment