Neck shape and Joint

This week, I completed neck rough shape and neck joint. Neck rough shape is required before the neck joint, because the neck heal section is very hard to work once the neck joint is completed. The mortise cut was completed last week. So, I needed fairly simple precise fitting work to obtain neck angle adjustment. Also, the precise fitting work is for the clean joint between the neck and the body. Neck fitting is a relatively time consuming work. However, if the mortise cut has been precisely done, this process is quite straightforward. In my case, I spend about one hour for the fitting work. Foe me, it was quite first. I have been using Epoxy for the neck gluing work.