Neck shaping and final sanding work have been done. The neck has 21mm thickness at 1st fret and 23mm at 10th fret. This is my standard neck thickness. This time, I made a Gibson style volute that has a gentle curve at the nut section. Gibson neck has famous neck head braking issue from an unwanted impact. This is due to the Mahogany grain selection at the neck head. My neck has a V-joint in between the neck and the neck head. My neck head has a flat sawn cut that makes the best impact resistance. Therefore, my guitar neck has some of the best impact resistance. After complete the neck shaping, I did sanding work, and then I applied two Epoxy filler sessions. Now, this guitar is ready for the spraying sessions.
No comments:
Post a Comment