I completed the Myrtle version for final assembly. I did fret wire leveling and polishing. I applied Oil finish over the finger board.Then, I assembled the neck and the body, and glued the bridge. I have been using the vacuum clumping system. The Kasha bridge needs to use a pressure aiding attachment to obtain a perfect assemble, because the Kasha bridge has super thin edges. Once I apply the glue over the bridge bottom, the bridge wings will be bended due to the glue moisture. I have been using the vacuum clumping with the attachment. This technique enables to perfectly accomplish very tricky Kasha bridge assembly.
Kohei Fujii Guitars
Sunday, July 17, 2011
Friday, July 1, 2011
Brazilian special is completed
Finally, the Brazilian special nylon model is completed. I attached a Kasha style impedance matching bridge. This bridge is heavily tapered. So, the bridge install is quite tricky. Tapered edge bends when apply glue due to the moisture. I have to use a vacuum clump for removing moisture during the cure of the glue. You may see very thin bridge. I also installed an arm rest. The arm rest is also made by the 100-years old special Brazilian rose wood.
The completed guitar created a piano like very even tone with nice brightness. Bass is very strong and treble to very bright. I have never heard of this much strong bass other than Kasha bracing system. This guitar has very nice Kasha model sound. However, my design showed more balanced tone character, because I shortened some tone bars in buss side. I also added two strong horizontal braces in upper bout. I also moved the sound hole into players side. This offset sound hole improved monitoring capability for a player. So, this guitar does not need additional sound ports. Anyway, I am really happy with result.
I will install a piezo pick-up system for this guitar.
The completed guitar created a piano like very even tone with nice brightness. Bass is very strong and treble to very bright. I have never heard of this much strong bass other than Kasha bracing system. This guitar has very nice Kasha model sound. However, my design showed more balanced tone character, because I shortened some tone bars in buss side. I also added two strong horizontal braces in upper bout. I also moved the sound hole into players side. This offset sound hole improved monitoring capability for a player. So, this guitar does not need additional sound ports. Anyway, I am really happy with result.
I will install a piezo pick-up system for this guitar.
Friday, February 11, 2011
In memory of Taku Sakashita
Today is a memorial day of Taku Sakashita. February 11, 2010, Taku untimely finished his life from a tragic situation. Actuary, I visited his shop on that day, because we had a plan to go to a guitar material supplier in Healdsburge CA. When I was in his shop, there were many polices and detectives under investigation. Actuary, I was asked many questions from one of the detectives. Then, I was noticed Taku's situation from the detective.
Taku was my mentor of guitar building. I have learned so many things for guitar design, building, setup, and finishing. However, the biggest influence from Taku is an attitude for making guitar. When I make a guitar, I try to avoid anything I regret. Guitar making process must be as perfect as possible. Whenever I feel tired or want to short cut a building process, I always see photos for Taku's guitar. His master pieces have no compromise. His guitars are so beautiful. He really loved making guitar, designing new model, and enjoying conversation with buddies. All of sadden, his life was ended and his guitar making life was terminated. Only one thing I can do for Taku is Whenever I make a guitar, I follow his way of making guitar.
Taku was my mentor of guitar building. I have learned so many things for guitar design, building, setup, and finishing. However, the biggest influence from Taku is an attitude for making guitar. When I make a guitar, I try to avoid anything I regret. Guitar making process must be as perfect as possible. Whenever I feel tired or want to short cut a building process, I always see photos for Taku's guitar. His master pieces have no compromise. His guitars are so beautiful. He really loved making guitar, designing new model, and enjoying conversation with buddies. All of sadden, his life was ended and his guitar making life was terminated. Only one thing I can do for Taku is Whenever I make a guitar, I follow his way of making guitar.
Subscribe to:
Posts (Atom)
