This week, I was quite busy for my private stuff. I do not have many progress. I did SSJ model assemble, and top side surface leveling using a contour sanding board. Now, you may see completed three bodies. You may also see the difference of the body shape. SSJ has quite narrow waist with wider lower bout width. I will make solid linings for the SSJ top side, and will install it next week.
Kohei Fujii Guitars
Sunday, February 3, 2013
Sunday, January 27, 2013
SSJ model assembly
Side laminate for the SSJ model is complete. Laminate material is Canadian yellow ceder. I expected a little bit tricky work for the side lamination, because the SSJ model has steep waist curves. In reality, I was able to manage the laminate work quite straight forward way. I am quite happy with this result. I was afraid of loosing expensive African black wood material. The completed sides have quite nice flatness. This result makes my future sanding work so easy. Now, I am working on the side assembly work. I already finished the bottom block assembly. I am working on the neck block assembly. Then I will work for a small block assemble for the cut-a-way portion. Next week, I will assemble solid linings for the SSJ model. I have to make a mold for laminated linings for the SSJ model.
SSJ model has exactly the same body shape as the Gibson J-185 model, This design has 16" widest body width. This body size is still bigger than Martin D-size. However, due to the narrow waist shape, this guitar is very easy to play. I will add the beveled armrest in this body, because the lower bout is bigger than D-size shape. I need to improve a comfort level for playing for smaller body size players.
SSJ model has exactly the same body shape as the Gibson J-185 model, This design has 16" widest body width. This body size is still bigger than Martin D-size. However, due to the narrow waist shape, this guitar is very easy to play. I will add the beveled armrest in this body, because the lower bout is bigger than D-size shape. I need to improve a comfort level for playing for smaller body size players.
Sunday, January 20, 2013
SSJ side bend
I did not update last week. I made a side bending pattern for SSJ model, and then finish the side bending. SSJ has very deep wast, and the side bending requires a little bit of creativity for holding side materials. You may see second picture that I added extra clamps. Black wood sides are very nicely bended for the SSJ pattern.
I also finished solid lining install for the King wood version of the MD model. I have been using special wood piece to clump a tricky 45-degree beveled armrest. This specially design small device enables to clump a hard to clump component.
I also finished solid lining install for the King wood version of the MD model. I have been using special wood piece to clump a tricky 45-degree beveled armrest. This specially design small device enables to clump a hard to clump component.
Sunday, January 6, 2013
New Laminate material
Laminate material has arrived from Notable woods who is a high quality guitar material supplier. I have been buying many materials from Bruce. I have always been satisfied with his quality materials. This time, I ordered 10-sets of Alaskan ceder laminate materials for sides. Bruce cut the yellow ceder for 2mm thickness that is perfect thickness for my final sanding to get approximately 1.5mm thickness. I already finished laminate work for sides including cut-a-way portion for the MD model. Yellow ceder is so much easier to bend and glue for laminating. I will do the same process for the SSJ model next week.
Monday, December 31, 2012
MD lining install
The year 2012 is almost ending. I have an update for one of the MD model. I finished solid lining install including for a beveled armrest. This guitar is my 3rd projects that requires the beveled armrest install. I am quite comfortable for installation of the armrest. This time, I will use a Cocobolo veneer for the beveled armrest. I also will use Madagascar rosewood as binding material. This MD has black wood side and backs. Slightly lighter color of binding matched with Cocobolo beveled armrest will create a nice color contrast.
Thank you for watching my blog in the year 2012. I will continuously update my progress in the coming year 2013. I hope all of followers in this blog have a happy new year of 2013.
Thank you for watching my blog in the year 2012. I will continuously update my progress in the coming year 2013. I hope all of followers in this blog have a happy new year of 2013.
Wednesday, December 26, 2012
MD assemble
While I am waiting for Yellow ceder side laminate materials come. Blocks making, and side assemble are done for one of the MD models. Neck block and the bottom block are made from Cedro. Neck block has three piece configuration. Cedro is the best material for me. This material is lighter than Honduran mahogany. Ceder has very nice tap tone with a lot of over tones. However, this material is also getting herder to obtain. In fact, this material is not able to export from the US without authorized documentation. Now, sides are assembled as shown in photos. Next step is making solid linings, and then I will install linings.
Sunday, December 16, 2012
side laminate
This week, I finished side bend and laminate process for one of the MD models. I used Cocobolo for the laminating material. African black wood for outer material is approximately 1.8mm and the Cocobolo is approximately 1.5mm, and the total thickness for the sides is 3.3mm. This is a very thick sides compared with conventional solid side design. Laminated sides create a very solid construction that maximizes top vibration efficiency to create more power and better overtone generation. As a result, the guitar creates very clear tone and long sustain. Cocobolo laminate material is also very beautiful. This sides could be reversible because it is so beautiful. However, it is impossible to make a reversible sides.
Subscribe to:
Posts (Atom)