I had a chance to visit a shop for Ervin Somogyi in Oakland California. I also had a chance to show my guitars to Ervin. I brought a 12-steel strings guitar and Myrtle nylon strings guitar. He examined very carefully, and he really likes my guitars. Ervin is a very good Flamenco player too. He played a beautiful flamenco tune.
I was rejected for the Healdsburg guitar festival in 2013 August. To get a booth space for the festival, I need a strong recommendation from an influential person in the guitar community. To get fair recommendation, I showed my guitars to Ervin. I hope I am able to get a booth space in the next festival.
Kohei Fujii Guitars
Friday, November 23, 2012
Sunday, November 18, 2012
Rosette naking 2
Rosette install for three tops are completed. I installed a black dyed maple inside the sound hole. This black trim is for a cosmetic accent and is also for moisture sealing for the sound hole. I have been using this design for my latest model builds. Now, three tops are ready for installing basing.
Last photo is for my guitar making assistant, and her name is "Nyaomi". She is playing with a scrapped sound hole.
Last photo is for my guitar making assistant, and her name is "Nyaomi". She is playing with a scrapped sound hole.
Sunday, November 11, 2012
Rosette making
I created a new Rosette design. I like simple and elegant design. I do not like busy design. This time, I created simple and unique design. First photo is my own Rosette cell pattern. Rosette body is made from Macassar Ebony. After install the Rosette body, two cells are installed as face to face manner. The other single cell is also installed individually. I think, this is a unique and elegant design.
Sunday, November 4, 2012
New project start
SSJ and MD project start. SSJ will use Taku Sakashita made original mold. This model will be a 12-strings guitar. I will make two MD model in this lot also. SSJ has a German top with African black wood (ABW) back and sides. One MD is a German top with ABW B&S. The other MD is a Carpathian top with King wood B&S. I did the top joint work and rough thickness sanding for three guitars. Next step is installing rosette.
Sunday, October 28, 2012
Nylon Model Complete
This week, I completed the Nylon model. This guitar has about 2" smaller body size compared with the predecessor shown in the 3rd photo. Purpose of shrinking the body size is to obtain more quick response, and less strong bus for Jazz musicians. This guitar showed very similar sound character as the full size version. Difference is simply just a little bit quiet. Other than that, new mini version has very similar results. I was a little bit surprised from this results. From this experience, I have gotten a conclusion that as long as a guitar has same bracing patter, guitar creates similar sound character.
Another difference for this nylon model is material. This guitar has Oregon Myrtle side and back. Myrtle created shorter sustain. This sound character is suitable for Jazz music. I designed this model as a platform for installing a pick-up system. I will install electrical pick-up system soon. I will report once I got an electrical version of this guitar.
Another difference for this nylon model is material. This guitar has Oregon Myrtle side and back. Myrtle created shorter sustain. This sound character is suitable for Jazz music. I designed this model as a platform for installing a pick-up system. I will install electrical pick-up system soon. I will report once I got an electrical version of this guitar.
Sunday, October 21, 2012
MD Complete
A long jury to complete MD model is finally over. I completed MD making this weekend. This guitar gave me a very satisfying sound quality. This guitar has amazingly long sustain and tonal response. A 12-deghree head angle design gave me a very player friendly string tension without sacrificing tonal quality. This is an amazing surprise. I hope this guitar satisfies a new owner's desire for owing a new guitar, and to be a good partner of a new owner. This guitar will be shipped to Japan tomorrow.
Sunday, October 14, 2012
Final polishing and Bridge install
Finally. MD model completed final sanding and polishing. Sanding session started with 600-grit sanding paper through, 1200-grit, and 2000-grit. Top photo is for after 600-grit sanding session, and second one is after 1200-grit session. After finishing the 2000-grit sanding, I had polishing sessions. Then, I did bridge install. Bridge install has been done by a vacuum clamp with 20Hg vacuum setting. My bridge has super thin wings thickness; therefor, I need the vacuum clamping system. It is almost impossible to install my unique bridge using a conventional clumping technique.
I checked neck angle to the installed bridge. It looks perfect. I will have a final fret dressing session, nut and saddle making. Then, this guitar is ready for a test drive. I might be able to complete MD guitar making project next Sunday.
I checked neck angle to the installed bridge. It looks perfect. I will have a final fret dressing session, nut and saddle making. Then, this guitar is ready for a test drive. I might be able to complete MD guitar making project next Sunday.
Subscribe to:
Posts (Atom)