Filler leveling

There is not much progress visually; however, I did a lot of work this week. I did leveling sessions for Epoxy filler to get the final spray session ready surface. I needed two filler applying sessions for Spanish ceder necks. King-wood body and Myrtle body were able to obtain nice leveling with only one session. After finishing the leveling session, I applied an Alcohol thinned Epoxy coat to optimize color difference due to an excess sanding during the surfacing session. It takes approximately 48-nours to obtain complete Epoxy cure for the Epoxy coat, because the Alcohol work as a retarder.  Now, both MD and Nylon model are ready for final coats spraying. I will spray 10-filanl coats in two days next weekend.

There is a question from the MD client. His question is that this body seems a bit thicker than ordinal D-size guitar. This MD body does not have thickness modification. Thickness at the bottom is 120mm ,and at the neck joint, it is 94mm.