Kohei Fujii Guitars

Kohei Fujii Guitars

Sunday, October 12, 2014

MD Complete

Finally the MD model making is completed. I have been working on this project more than a year. However, I have very good confidence that this guitar have very good sound quality. When I have a final sanding session, this guitar already showed very good tapping tones. The sound is actuary too loud. This is a very good sign. The top material I used this guitar was obtained from an estate sale from a retired guitar maker. There was only an indication as the European Spruce when I purchased it. However, this top has perfect silk pattern when I cut it. In fact, cross grains are almost perpendicular. So, the top material quality is the premium level. This is the reason why this guitar shows amazingly good tap tones. I will take Epoxy filling sessions in this week,



Sunday, September 14, 2014

Complete

Both Nylon and SSJ are completed. SSJ model showed pretty good balance from buss to treble. I recognized very even over tone distribution for all 6 strings. I changed the X-bracing angle a little bit wider for this built. As a result, this guitar showed very good over tone balance for solo tunes. Side ports help a lot for monitoring sound for the player. I think this guitar is an ultimate recording guitar.

Nylon model also showed very good tone balance from buss to treble. I have been making Kasha-Shunider style bracing. Kasha bracing has too much buss; however, this lattice bracing showed very good balance. This nylon model requires tow more years to open-up completely. So, I am very excited to see the matured nylon model.

For the Lattice back bracing, I did not see any sound difference compared with the ladder bracing. I need to check the sound for some one plays those instruments, because the lattice back bracing helps to improve the projection.



Monday, September 1, 2014

More polishing

Now, I am working on the SSJ for the final polishing. I still need to built a bridge for the SSJ. Hopefully, I am able to assemble all parts next weekend for both SSJ and Nylon model.



Thursday, August 28, 2014

Finishing and polishing

SSJ and Nylon model are finished final coating. I also completed the bridge making for the nylon model. I changed the bridge shape to much smaller buss side size to minimize buss sound. I also increased the treble side size. Previously using Kasha designed bridge created too much sound compensation between buss and treble.
I have been working on the final polishing for the nylon model, and it will be finished by Friday. I will take the final assembly for the nylon model this weekend. I am very excited to test the lattice braced nylon strings guitar.




Sunday, August 10, 2014

Top Saining

I applied yellow stain on the top for both SSJ and Nylon models. I have been using yellow stain for my latest builds for a year. Yellow stain fades a way over time; therefore, it requires slightly strong staining on the yellow top. After I applied the stain, I also applied very thin Epoxy cote using Alcohol thinning technique. Epoxy apply is for making an even color for overly sanded portions during filling sessions. Now, both SSJ and Nylon models are ready for final coat spray session. I will apply eight coats of EM6000 Water based Acrylic finish next week.



Sunday, July 27, 2014

Epoxy filler work

I start finishing work for SSJ and Nylon models. I applied System-3 Epoxy with Silica form on top. I have been using Epoxy filler even on the top. For sides and back, I will use the same formula with dark brown dye for making darker color. So, the top per-coating is able to protect the dye contamination to the top. I will apply couple of Epoxy cotes during this week, and then take sanding sessions next week-end.




Sunday, July 20, 2014

Side ports making

I have been working on final sanding for Nylon and SSJ models. While I am working on the sanding sessions, I thought that the SSJ model has quite large armrest bevel. It seems perfect for adding side ports on the beveled armed rest. So, I decide to add four side ports on the beveled armrest. SSJ model still needs a little bit more sanding work perpendicularly on the top. Nylon model is completed the sanding work and it is ready for filling work. I will start filling work next week.