A body for the SSJ model was closed. This body also shows approximately 1-second of tapping sound decay time. This is what I want to get. This guitar design is almost perfect at this moment. Now, I have two closed bodies for MD and SSJ. Both bodies show approximately 1-second of tapping sound decay time. Next week, I will close the other MD body made out of King wood.
Kohei Fujii Guitars
Sunday, March 17, 2013
Sunday, March 10, 2013
Closed box for the MD
I closd the box for one of the MD models. I also open the beveled arm rest portion after closed the box. MD model showed excellent long sustainable tap tone. I usually expecting approximately 1-second of tap tone. Too much thinned top makes too long sustain. Top thickness adjustment is a very tricky business. I also start assembling the SSJ model. Assembly process is exactly the same as the MD model. After attach the back, I apply couple of nitrocellulose coats, and then attach the top.
Sunday, February 24, 2013
MD assemble
I finished final tuning for the top, and then applied couple of coats of Shellack. Top and side fittings for the sides are done. Back is already assembled to side. After assembled the back, I applied couple of coats of Nitrocellulose lacquer for moisture sealing inside the box. This time, I did not use the Shellack into the black wood surface, because the black wood has very dark resin. Resin will spread all over the bracing if I use Alcohol based shellack. It makes messy finishing inside the box. Sprayed finish created nice and shiny surface. Now, this MD body is ready to close the box.
Sunday, February 10, 2013
SSJ side assemle complete
SSJ side assemble is complete. SSJ model also has the beveled armrest,and it install work was completed. Now, three sides are ready for closing box. Next week, I start closing the boxes. Once finish the box closing, I will work for neck blanks making. Then, I back to detailed purfling and binding works for the body.
Sunday, February 3, 2013
SSJ assemble part 2
This week, I was quite busy for my private stuff. I do not have many progress. I did SSJ model assemble, and top side surface leveling using a contour sanding board. Now, you may see completed three bodies. You may also see the difference of the body shape. SSJ has quite narrow waist with wider lower bout width. I will make solid linings for the SSJ top side, and will install it next week.
Sunday, January 27, 2013
SSJ model assembly
Side laminate for the SSJ model is complete. Laminate material is Canadian yellow ceder. I expected a little bit tricky work for the side lamination, because the SSJ model has steep waist curves. In reality, I was able to manage the laminate work quite straight forward way. I am quite happy with this result. I was afraid of loosing expensive African black wood material. The completed sides have quite nice flatness. This result makes my future sanding work so easy. Now, I am working on the side assembly work. I already finished the bottom block assembly. I am working on the neck block assembly. Then I will work for a small block assemble for the cut-a-way portion. Next week, I will assemble solid linings for the SSJ model. I have to make a mold for laminated linings for the SSJ model.
SSJ model has exactly the same body shape as the Gibson J-185 model, This design has 16" widest body width. This body size is still bigger than Martin D-size. However, due to the narrow waist shape, this guitar is very easy to play. I will add the beveled armrest in this body, because the lower bout is bigger than D-size shape. I need to improve a comfort level for playing for smaller body size players.
SSJ model has exactly the same body shape as the Gibson J-185 model, This design has 16" widest body width. This body size is still bigger than Martin D-size. However, due to the narrow waist shape, this guitar is very easy to play. I will add the beveled armrest in this body, because the lower bout is bigger than D-size shape. I need to improve a comfort level for playing for smaller body size players.
Sunday, January 20, 2013
SSJ side bend
I did not update last week. I made a side bending pattern for SSJ model, and then finish the side bending. SSJ has very deep wast, and the side bending requires a little bit of creativity for holding side materials. You may see second picture that I added extra clamps. Black wood sides are very nicely bended for the SSJ pattern.
I also finished solid lining install for the King wood version of the MD model. I have been using special wood piece to clump a tricky 45-degree beveled armrest. This specially design small device enables to clump a hard to clump component.
I also finished solid lining install for the King wood version of the MD model. I have been using special wood piece to clump a tricky 45-degree beveled armrest. This specially design small device enables to clump a hard to clump component.
Subscribe to:
Posts (Atom)