Kohei Fujii Guitars

Kohei Fujii Guitars

Sunday, September 16, 2012

Epoxy filler apply

     I finished Epoxy filler apply for both MD and Nylon models.I have been using System-3 with Silica powder for pore filling. This technique is able to finish the pore filling process in one session if I very carefully fill pores. This is a real time saver. Also, System-3 based filler does not sink much over the time compared with conventional filler. Only one draw back for the Epoxy filler is a poor adhesion over the Shellac. So, I have to avid using Shellac as a sealer.
     After applying the Epoxy filler, a really beautiful color and figures are appeared as you can see those photos. King wood has really nice reddish color. Myrtle wood has extremely nice figures and spider patterns. Both models will be very nice eye catching guitars.



Sunday, September 9, 2012

MD final sanding is done

Final sanding for the MD is done. MD is ready for the finishing work, Capatian top looks pretty nice, and King wood back and sides are also pretty good. King wood is a tricky material for the finishing work, because this material has quite strong reddish stain that easily contaminate brighter color materials such as top and Black-white border. I have been using Epoxy filler, and the Epoxy filler is able to prevent the contamination issue. However, when I apply Epoxy filler, I need an extreme care. It seems like the King wood has fairly small pores, and one Epoxy filling session might be able to fill the pores completely. I will have a final sanding session for the Nylon model next week, and then I will start finishing work for both models.


Monday, September 3, 2012

Neck making 8

     I changed heal shape design for the MD model. First photo is for last week's shape, and second one is for this week's one. I made a little bit of negative curve for the heal portion. This is a bit beautiful for me. I also installed a semi raised neck shim above 14th fret. Now, the MD making is completed, and the last step is a sanding work, and then I will start finishing process.
     For the Nylon model, I finished the neck shaping work. This neck has a V-joint between the neck and the head. I made a Diamond volute at the v-joint. Martin D-28 has the diamond volute; however, D-28's volute is a faked one. Only v-joint neck is able to make the diamond volute. I did a drilling work for the slotted head. This unique neck head design requires an individual machine head drilling. I created an individual drilling jig for this unique neck making. Now, the nylon model is also ready for the final sanding session.




Sunday, August 26, 2012

Neck making 7

Neck shaping for the MD model is completed. Cross-section of the neck is precisely shaped based on a template for 1-st fret and 10-th fret. Machine head holes are also drilled, and I did temporarily installed machine heads. Machine heads are Goto 510 delta model that has 21:1 gear ration. This model has the best gear ratio that enables very quick and precise tuning change for different open tunings. Neck heal is also shaped as steep as possible for easy access to the high position. This neck design also has a beautiful volute at 0-fret position. This is a Taku's signature design, and I have been keeping this design feature.


Sunday, August 19, 2012

Neck Making 5

     This week, I finished finger board surfacing, radiusing, fret-wire install, and neck rough shape.
     I have been using 20' radius for the fingerboard. I remove almost 80% of fret-wire tangs, because the tangs expand fingerboard slots. It makes the neck's reverse bending. Some builders use this effect as the neck re-enforcement. However, the neck curve control is extremely difficult. I do not want to change neck bend after install the fret wires. So, my neck shape will never be changed after install the fret-wires. I use yellow glue for the fret wire install. Usually, I do not have a fret-wire leveling session during the guitar neck set-up, because the fret wires are already precisely leveled.
     For the neck shaping, I start with neck thickness shape, and thicknesses are 21mm at 1-fret and 23mm at 11-fret respectively. Then, I remove the neck's shoulders. After, finish the rough shaping, I will use a home made large sanding board for final neck shaping. This is the quickest, and most accurate neck shaping technique for me.


Sunday, August 12, 2012

Neck making 4

     I have been continuously working on the neck construction project.This week, I did finger-board making, install, neck outline shaping, heel portion rough cut, and heel cap install. Now, both MD and Nylon models revile really sexy outlines. MD model has a 44mm wide at 0-fret, 25.4" scale, slim 14th fret joint neck, and Nylon model has a 50-mm wide at 0-fret, 650mm scale, low profile 12th fret  joint neck. Both models have approximately 5-mm raised neck setting at the neck jointing position. Finger board on the raised neck is isolated from the guitar top above 12th or 14th frets depending on models. This design makes best sound quality above the neck joint portion due to the enough supporting material underneath of the finger-board.
     Next week, I install fret wires, and start neck shaping.


Sunday, August 5, 2012

Neck making 3

     This week, I did graphite rod install, truss rod install, and head plate veneer install. I always cover the truss rod and graphite rod channels with wood filling rods. This makes easy adjustment for finalizing neck angle adjustment using hand planes. Also, wood filling technique minimizes a rattling problem from the truss rod.
     This time, I used King wood for neck head veneer for MD model. For nylon model, I used Myrtle for head plate veneer.
     Next steps are finger-board install, neck outline shape, and neck profile shape. Now, those guitar construction projects are final chapters as the wood working part.